Skil MS6305-00 Manual Del Propietário página 15

27 . Bevel-Lock Knob
Locks the saw at any desired bevel angle.
28 . Bevel-Stop Bolts
Allow adjustment of the 45° bevel. There is
one each for the left and right bevel.
29 . Right Bevel-Release Knob
Permits right bevel cuts.
30 . 45° Bevel Stop
There is one 45° bevel stop for each bevel
direction, the left 45° bevel stop can slide in
and out to provide quick access to left 45°
and 48° bevel angles. The right 45° bevel
stop can provide quick access to right 45°
bevel angle.
31 . Bevel Scale
Scale allows you to read bevel angles easily.
32 . Bevel-Scale Pointer
Bevel-scale pointer can be adjusted.
33 . Slide-Rail Lock Knob
Turn the slide-rail lock knob to lock the slide
rails into the desired position.
34 . Dust Port
Fixed dust port allows easy attachment of
certain vacuum hoses and dust bag.
35 . Depth-of-Cut Stop
As a position stop to control the depth of cut.
36 . Depth-of-Cut Bolt and Nut
Used with the depth-of-cut stop; rotate the
depth-of-cut bolt to achieve the desired depth
of cut and then secure it with the nut.
37 . Miter-Angle Pointer
Can be easily set after making adjustment to
miter scale.
38 . Miter-Detent Pin
When it is engaged with one of nine (9)
miter detents, you can achieve miter cut at
common miter angle in fast and accurate
way.
15