Skil MS6305-00 Manual Del Propietário página 32

2. Move the table extension inward or outward depend on your application.
as the limit stop which is built in the extension rod, to prevent the extension rod falling off.
(Fig.33a & 33b)
3. Tighten the lock knob to secure the extension in place.
4. Repeat for other extension.
Fig. 33a
Adjusting support foot
Turn the support foot clockwise or
counterclockwise depending on the amount
of support needed for making sliding cuts.
(Fig.34)
32
Fig. 33b
Base
Fig. 34
A screw serves
Table extension screw
Support foot