Switching Off Torque Wrench; Settings; Display - Garant 655010 Manual De Instrucciones

11.5. SWITCHING OFF TORQUE WRENCH

1. Press OK for longer than three seconds.
» Torque wrench switches off.

12. Settings

20/02/2020 16:32
Peak: ---
0
Nm
Calibrated
1. Press the down function button or OK, enter the password if necessary and confirm with OK.
2. Select "Settings" and confirm with OK or the down function button.

12.1. DISPLAY

SETTINGS
Display
Measurement
System
1. Select "Display" and confirm with OK or the down function button.
2. Configure the following settings:
Brightness
Standby
Dimming
Time Format
Date
Time
20/02/2020 16:32
Connection
Data transfer
Workflow
Screw cases
Settings
Set screen brightness in percent.
Set inactive time until torque wrench switches off.
Set inactive time until display switches off.
Set time format 12 h/24 h.
Set date in DD.MM.YYYY format.
Set time.
www.hoffmann-group.com
SETTINGS
Display
Measurement
System
SHOW
Brightness
Standby
Dimming
Time Format
Date
en
90%
10 min
5 sec
12 h
20/02/202
0
43