Maintenance; Cleaning; Storage; Technical Data - Garant 655010 Manual De Instrucciones

GARANT Electronic torque/rotational angle wrench HCT
Fault/display message Possible causes
80%% of memory used Percentage of the memory used. Transfer history to the computer or
en

15. Maintenance

Frequency
Every 5000 tightening opera-
tions, or every 12 months
Tab. 1: Maintenance table

16. Cleaning

Remove dirt using a soft clean dry cloth. Do not use chemical, alcoholic, abrasive or solvent-based
cleaning agents.

17. Storage

Before storage, remove rechargeable battery. Store the rechargeable battery in a dry and dust-
free location at a temperature between -20°C and +25 °C and a humidity level of less than 75%.
Ensure the charge level is at 30%.
Store the torque wrench at a temperature between -20°C and +70°C and at a humidity of less than
90% (non-condensing). Store in the original packaging, protected from light, free of dust in a dry
place. Do not store close to corrosive or aggressive chemical substances, solvents, moisture or dirt.

18. Technical data

Dimensions and general data
Size
Square drive
Socket for plug-in
head
Functional length 370 mm
Length
Width
Height
Weight
Pre-warning
Display
Memory
Temperature and
humidity of the
work environment
Reference temper-
ature
Protection class
46
Maintenance work
Recalibrate, adjust as necessary Hoffmann Group Customer Ser-
12 30
¼ inch ¼ inch
9×12 mm 9×12 mm
370 mm
370 mm 370 mm
57.5 mm 57.5 mm
45 mm 45 mm
0.7 kg 0.7 kg
Adjustable: 50 – 99% of the minimum target value
2.8 inch TFT display
History: 1000, screw cases: 100, workflow: 10, screw cases per workflow: 10
-10°C to +40 °C, up to 90%, non-condensing
23 °C 23 °C
IP 40
Instruction manual
Action
app. Delete data in the torque wrench.
Performed by
vice
50 100
3/8 inch 1/2 inch
9×12 mm 9×12 mm
407.5 mm 423.4 mm
407.5 mm 418.5 mm
57.5 mm 57.5 mm
45 mm 45 mm
0.9 kg 1.1 kg
23 °C 23 °C
200 340
½ inch ½ inch
14×18 mm 14×18 mm
530 mm 650 mm
530 mm 650 mm
57.5 mm 57.5 mm
45 mm 45 mm
1.5 kg 1.6 kg
23 °C 23 °C