Digital Radio / Dab Operations - Clarion DXZ948RMP Manual De Instrucciones

Digital Radio / DAB Operations

DAB control function
When a CeNET cable is used to connect a DAB
(Optional, DAH913 or DAH923), all functions
can be operated.
Listening to the DAB station
1. Press the [ROTARY] knob to change the
operation mode.
Notes:
• The display shown in the normal reception mode
and the preset reception mode is the same as
that when a DAB station is received.
• The number of programmes and broadcasting
times depend on the DAB station.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [ROTARY] knob to select the DAB
mode.
2. Touch on the left of the display.
"DAB" lights up in the display when the main
unit receives a DAB station.
∗ The main unit stops the seek tuning when
it cannot find a DAB station. The display
returns to the previous mode.
Manual tuning
1. Press the [ROTARY] knob to select the DAB
mode.
2. If "MANU" is not displayed, touch and hold
BAND for 1 second or longer.
If "MANU" is displayed, manual tuning is
possible.
3. Touch on the left of the display to tune
the station.
∗ If no operation is performed for more than
7 seconds, manual tuning is cancelled and
the display returns to the previous mode.
58
DXZ948RMP
Switching programmes
1. Press the [ROTARY] knob to select the DAB
mode.
2. Touch on the left of the display to
switch programmes in the DAB station.
Note:
• The programme name may be the same
depending on the DAB programme.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Press the [ROTARY] knob to select the DAB
mode.
2. Touch MODE.
3. Touch S-SCAN.
"S-SCAN" lights up and this unit starts
scanning each programme for 10 seconds
sequentially.
Each time the main unit scans, the
programme name is shown in the display.
4. To stop programme scan when a desired
programme is tuned in touch S-SCAN.
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset to the preset
buttons.
[M1], [M2] and [M3]
1. Press the [ROTARY] knob to select the DAB
mode.
2. Touch BAND to select any one shown
above.
3. Touch and hold MODE for 1 second or
longer.
The preset memory list is displayed.
4 Touch and hold the preset No. to be stored
for 2 seconds or longer.
You will hear a long beep, and the station is
stored to memory.
If you hear a short beep, the station is not
stored to memory. Repeat the procedure
from step 1.
Note:
• Interrupt programmes (PTY or INFO) cannot be
written to manual memory.
Recalling a preset
programme
1. Press the [ROTARY] knob to select the DAB
mode.
2. Touch BAND.
Each touch of BAND changes the display in
the following order:
MEMO1 MEMO2 MEMO3
MEMO1...
3. Touch on the right of the display to
recall a preset programme.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
• The factory default setting is "ON"
• If the reception of the current broadcast
station deteriorates, "SEARCH" appears in
the display and the radio searches for the
same programme on another frequency.
• For details on the "AF function"(cf. page 26) ,
refer to the section "RDS operation" of the
respective owner's manual.
To switch the AF function ON
To switch the AF function OFF
AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit automatically switches to receive the
broadcast with the better reception.
TA (Traffic Announcement)
When a traffic announcement broadcast starts
in the TA standby mode, the traffic
announcement broadcast is received as top
priority regardless of the function mode. Traffic
programme (TP) automatic tuning is also
possible.
• This function can only be used when "TP" is lit
in the display. When "TP" is lit, this means that
the DAB or RDS broadcast station being
received has traffic announcement
programmes.
• For details on "TA" (cf. page 27), refer to the
section "RDS operation" of the respective
owner's manual.
To set the TA standby mode
To cancel the TA standby mode
To search for a TP station
Digital Radio / DAB Operations
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• "TP" may be lit in the display when a TP
broadcast is transmitted from an RDS station. In
this case, press the [TA] button to perform TP
seek tuning. Press the [TA] button again to return
to the previous mode.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
automatically switches to the selected
announcement programme.
To set the INFO standby mode
If you press and hold the [TA] button for 1
second or longer, "INFO" lights in the display
and the main unit is set to the INFO standby
mode until the selected announcement is
broadcast.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected
announcement broadcast is being received,
reception of the selected announcement
broadcast is cancelled and the main unit enters
the INFO standby mode.
To cancel the INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON for up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH Contents
Travel Transport flash
Warning Warning / Service
News News flash
Weather Area weather flash
Event Event announcement
Special Special event
DXZ948RMP
59