Using Miter Detent System - Bosch CM12 Instrucciones De Funcionamiento Y Seguridad

BM 2610021316 10-11 E:BM 2610021316 10-11 E.qxp 10/17/11 11:02 AM Page 22
fasten from back of fence:
Use minimum 3/4" auxiliary fence and 1/4" round
head wood screws (3/4" long).
1. Drill four pilot holes through auxiliary fence and
run screws from rear of metal fence.
2. Repeat test cut.
Check for interference between
WARNING
auxiliary fence and saw head
componenents by performing a dry run. Fence
interference can prevent proper saw operation and
cause injury and/or tool damage.
"
5-1/2
"
3-1/4
Basic Saw Operations
7 "
7-3/8 "
"
2-3/16

Using Miter Detent System

FIG. 30
Auxiliary
fence
FIG. 31
"
22
Detents
Detent
plate
-22-
Blade
Slot
flat Head Machine
Screws
7-3/8 "
3-1/4 "
"
2-3/16
Miter
lock Knob
Miter
Miter Scale
Detent lever
pointer
"
2-3/4
FIG. 32