General Safety Instructions; Suitable Personnel; Environmental Protection; Delivery Scope - Amann Girrbach Therm Instrucciones De Montaje

2 General Safety Instruc-
tions
When installing, starting-up and operating the
machine, always observe the following safety
instructions:
WARNING:
Fire hazard!
▷ In case of unexpected processes in the furnace
(for example, strong smoke development or
odour nuisance), switch the furnace off imme-
diately and allow the furnace to cool down to
room temperature.
3

Suitable Personnel

NOTE:
Starting-up and operation of the machine may
only be carried out by trained specialised per-
sonnel.
4

Environmental Protection

Packaging
In terms of packaging, the manufacturer partici-
pates in country-specific recycling systems, which
ensure optimal recycling.
All packaging materials used are environmentally-
friendly and recyclable.
Waste equipment
Waste equipment contain materials that should be
sorted for environmental-friendly recycling.
▷ After the service life has elapsed, dispose of the
machine via the public disposal systems in an
environmentally-friendly manner.
G E N E R A L S A F E T Y I N S T R U C T I O N S
5

Delivery Scope

_ Heating rod (4 ×)
_ Mounting tool
▷ After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier.
DANGER:
For carrying out the further installation steps, a
qualified professional in the area of electrical
safety is mandatory.
The installation and repair of heating rods must
be performed by trained and certified personnel.
E N
11