Angelo Po FX 61 G3 Manual De Uso página 100

"AUTOMATIC WASHING" MODE
Proceed as follows.
1 – Select the "automatic washing" function using the
knob.
2 – Press the button to confirm the value or descrip-
tion selected.
The display will show page.
The page is used to select the type of program for
cleaning of the appliance.
3 – Check that there is at least 1 litre of the cleaning
products (cleaner and sanitizing agent) in each of the
respective tanks.
4 – Select the washing cycle required using the knob.
IT
5 – Press button to start the washing cycle.
GB
DE
Table of cleaning programs
FR
Programs
Standard cleaning
ES
Medium cleaning
Basic cleaning
Soft cleaning
Descaling
Short splash rinse
cycle and TMC long
rinse cycle
English
>>>
>>>
>>>
>>>
>>>
Cleaning program recommended for dealing with very stubborn residues (e.g.: after
convection cooking of meat with high fat content, such as chickens, roasts, etc.)
Cleaning program recommended for dealing with stubborn residues (e.g.: after con-
vection cooking of meat and/or fish).
Cleaning program recommended for dealing with easily removed residues (e.g.: after
mixed or convection cooking up to 150°C).
Cleaning program recommended for removing small amounts of residue (e.g.: after
steam cooking)
For removing limescale deposits from the cooking chamber.
For rinsing the cooking chamber without using detergent.
Washing
programs
Lavaggio.tif
Description
- 34 -
automatic cleaning
Time
standard cleaning
medium cleaning
basic cleaning
soft cleaning
De-scaling
semi-automatic washing
TMC long rinse cycle
short splash rinse cycle
enable water
enable ECO
drain cleaning
standard cleaning
Use and installation manual