Angelo Po FX 61 G3 Manual De Uso página 81

3 – To activate or deactivate the cleaning function of the
water drain at the beginning of every wash, rotate knob.
4 – Press the knob to confirm the selected parame-
ter.
Important
The function "Water drain cleaning" entails a
higher consumption of detergent; only use this
function if necessary, for example for frequent
cooking of greasy food (chickens, roasts, etc.)
User parameters
1 – To modify and thus personalise some preset
functions set by the manufacturer, select the "User
parameters" function with the knob.
2 – Press the knob to confirm the selected function.
3 – Rotate the knob to insert the password supplied by
the manufacturer (APGC).
4 – Press the knob to confirm the selected function.
The display will show page.
– Time for cleaning the oven: (default=OFF): the
oven is blocked and needs cleaning when the time
elapses (Standard, medium, Basic).
– Time for cleaning the oven: (default =1 hour): is
the remaining time of the oven blocking, beginning
from the warnings start (acoustic and visual) of the
oven blocking (see page 49).
– Warning time de-scaling: (default= OFF): is the time
after which the appliance warns the user to check the
oven and if necessary start the cleaning program (des-
caling, see page. 49).
– release cooking (default= OFF): select ON to re-
lease the oven from the CLE alarm.
– Unblock program (default =OFF):
– User button: is used to modify the "User key" writ-
ing present in the"Main functions (Home page)".
– Change user's Password: used to modify the "APGC" password (supplied by the
manufacturer) with a new password.
English
>>>
>>>
>>>
>>>>
>>>
>>>
- 15 -
water drain cleaning OFF
water drain cleaning OFF
User parameters * * * *
User parameters * * * *
User parameters A P G C
User parameters
A P G C
User parameters
time for cleaning the oven
time for cleaning the oven
warning time de-scaling
release cooking
unblock program
User button
change user's Password
Use and installation manual
IT
GB
OFF
1 hour
OFF
DE
OFF
OFF
FR
ES