medi circaid juxtalite ankle foot wrap Instrucciones De Uso página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
English
The garment should never hurt.
It should feel firm but
comfortable.
If pressure increases or decreases
noticeably during wear, readjust
the garment as needed.
If experiencing any pain,
immediately remove the
garment and consult your
physician.
Removal: First detach the ankle
band and fold it back onto itself
to keep it lint free. Lastly, loosen
the front foot band. The circaid
juxtalite ankle foot wrap slips off
like a shoe.
Ankle-band adjustment
The following steps will
permanently reduce the length
of the long ankle-band.
Step 1: Determine and mark the
desired length of the ankle-band.
Step 2: Remove the afw and
carefully cut it to the desired
length.
Step 3: Use the included Velcro
tabs to secure the ankle-band in
place.
Foot-length adjustment
The following steps will
permanently reduce the
foot-length of the circaid
juxtalite ankle foot wrap.The afw
can be trimmed by up to 1.25 in.
(3 cm) (see notches on both
sides).
Step 1: With the beige side facing
up, mark the desired length.
Step 2: Draw a straight line from
where you would like to trim.
Step 3: Carefully cut along the
drawn line, assuring that the
reinforced seam section of the
Velcro material is not cut.
Please note: No other
modifications can be made to the
garment.
Be careful that the reinforced
seam within the Velcro material
is not cut while shortening the
garment

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Circaid juxtalite

Tabla de contenido