Assigning Names To The Sources - JVC KD-LX1 Manual De Instrucciones

Assigning names to the sources

You can assign names to station frequencies and CDs. After assigning a name, it will appear
on the display when you select the source.
Station frequencies Up to 10 characters (up to 30 station
CDs*
3
1
Select a source you want to assign a name to.
2
When you select a station frequency
as the source:
3
Sources Maximum number of the characters
frequencies including both FM and AM)
Up to 32 characters (up to 40 discs)
6
2
Press and hold SEL (Select) for more than 2
seconds while pressing DISP.
Select the character you want while "_" is flashing.
Each time you press the button, the character changes.
About the available characters, see page 28.
* You cannot assign a name to a CD Text.
When you select the CD as the
source:
4
To be continued on the next page
C
27