Storing Your Own Sound Adjustments; To Reset To The Factory Settings - JVC KD-LX1 Manual De Instrucciones

Storing your own sound adjustments

You can adjust the sound control modes (BEAT, SOFT, POP: see page 18) to your preference
and store your own adjustments in memory.
3-
2
1
2
3
2
1
4
5
Repeat the same procedure to adjust other items.

To reset to the factory settings

Repeat the same procedure and reassign the preset values listed in the table on page 18.
3- 2, 4
1
Light "MODE" on the lower part of the display.
The number buttons can work as different function buttons.
REMEMBER you must finish the following steps while "MODE"
is still on the display. Otherwise, the setting will be canceled.
Select the sound control mode (SCM) you want.
For details, see page 18.
To adjust the bass or treble level
1 Select "BASS" or "TREBLE."
2 Adjust the bass or treble level.
To turn on or off the BBE function
See page 17.
Press and hold SOUND.
Your adjustment made for the selected sound control mode is stored in
memory.
1
BBE
19