Radio Operations; Listening To The Radio; Searching A Station Automatically: Auto Search - JVC KD-LX1 Manual De Instrucciones

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual searching to tune into a particular station.

Searching a station automatically: Auto search

1
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to
an FM broadcast.
2
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in FM stations only with strong signals
This function works only while searching FM stations, including SSM preset (see page 8).
1 Press MODE.
"MODE" appears on the lower part of the display, and the number buttons can work as
different function buttons.
2 Press LO (Local), while "MODE" is still on the display, so that the LOCAL indicator lights up
on the display.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.
6
FUNC
Select the band (FM1, FM2, FM3 or AM) you want.
If a CD is in the loading slot or the CD changer is connected, first select
the tuner using FUNC. (See page 5.)
Selected band (then clock time: see
page 25) appears.
To search stations of
higher frequencies
To search stations of
lower frequencies
1
LO MODE
Start searching a station.
When a station is received, searching stops.
2
CD-CH
BBE
Level meter (see page 25)