Digi-Trac™ Control System - Titan Airless 1650e Serie Instrucciones De Uso

4.7 Digi-Trac™ Control System
The Digi-Trac™ Control System increases the functionality of the
sprayer. It is installed directly below the pressure control knob on
the control panel. It consists of a display and four function keys. The
display shows various menu screens that allow the user to customize
and monitor sprayer operation using the function keys.
Display
Function
Keys
The pressure control knob overrides the Digi-Trac™
i
Control System settings. Anytime the pressure
control knob is turned, the sprayer pressure will
change accordingly.
Function Keys
The function keys are numbered 1–4. Each key is labeled with an
additional function as well.
#1/Menu Key Pressing the #1 key scrolls through the available
menu screens or performs a function described
on the active menu screen.
#2/p Key Pressing the #2 key performs a function
described on the active menu screen or increases
a value.
#3/q Key
Pressing the #3 key performs a function
described on the active menu screen or decrease
a value.
#4/Select Key
Pressing the #4 key selects the active menu
screen or performs a function described on the
active menu screen.
Menu Screens
Several menu screens are available for the user to customize and
monitor sprayer operation. They include Main Screen, Volume
Pumped, Job Volume, Unit Serial #, Timers, Job Timers, Service Time,
Security Code, Prime, and Rapid Clean.
Main Screen
The Main Screen is the default screen for
the control system at sprayer startup.
Pressing the #2 key switches between
PSI, BAR and MPa units of measure.
Press the #1 key to scroll through the
remaining menu screens.
i
For sprayers equipped with an nine-language Digi-
Trac™ Control System:
Pressing the #2 key at the Main Screen switches
between PSI, Bar and MPa units of measure.
Pressing the #3 key at the Main Screen changes
the language of the text on the display. There are
a total of nine languages available. Each time the
#1 key is pressed, a different language will appear.
The languages, in order of appearance, are: English,
Spanish, Dutch, Danish, Swedish, German, French,
Italian, and Portuguese.
Performance Series 1650e
SET MPa 23.0
ACTUAL MPa 22.5
SET MPa
ACTUAL MPa
GB
Volume Pumped Screen
The Volume Pumped screen shows the
total number of gallons or liters sprayed
by the sprayer.
To select the Volume Pumped screen,
press the #4 key.
job Volume Screen
The Job Volume screen allows the user
to reset a liter counter to track usage on
specific jobs.
To select the Job Volume screen, press
the #4 key.
unit Serial # Screen
The Unit Serial # screen shows the
sprayers serial number.
To select the Unit Serial # screen, press
the #4 key.
Timers Screen
The Timers screen shows the total time
the sprayer has been turned on as well
as the total time the sprayer has been
running (pumping).
To select the Timers screen, press the #4
key.
job Timers Screen
The Job Timers screen allows the user to
reset the "ON TIME" and "RUN TIME" to
track time on specific jobs.
To select the Job Timers screen, press
the #4 key. "JOB ON" screen will appear.
Press #3 to reset. Press #1 to continue
to "JOB RUN" screen. Press #3 to reset.
Press #1 to scroll through the remaining
menu screens.
Service Time Screen
The Service Time screen allows the user
to set a service time interval (in hours).
Below the set time, the screens shows
the current amount of hours on the
23.0
sprayer since the last activation of the
22.5
service timer. To select the Service Timer
screen, press the #4 key.
To set the service time, press the #2 (up)
and/or the #3 (down) keys to the desired
time (run hours will increase/decrease in
increments of 25 for each time you press
a key).
When the sprayer reaches the SERVICE@ time selected, the screen will
display "SERVICE DUE". To reset the timer, press the #3 key when the
pump is first turned on. This will reset the "SERVICE DUE" message
and also reset the "SERVICE TIME" to the previous setting.
13
Starting operation
VOLUME PUMPED
MENU-1 SELECT-4
GALLONS X
MENU-1 LITRES-2
LITRES X
MENU-1 GALLONS-2
JOB VOLUME
MENU-1 SELECT-4
GALLONS XXXX
MENU-1 RESET-3
UNIT SERIAL #
MENU-1 SELECT-4
SER # XXXXXXXXXX
MENU-1
TIMERS
MENU-1 SELECT-4
ON TIME XXXX
RUN TIME XXXX
JOB TIMERS
MENU-1 SELECT-4
JOB ON X
MENU-1 RESET-3
JOB RUN X
MENU-1 RESET-3
SERVICE TIME
MENU-1 SELECT-4
SERVICE @ XX
RUN HOURS XX