Technical Specifications; Vx0003; Vx0100 - Metrix BioTest Manual De Instrucciones

6.

TECHNICAL SPECIFICATIONS

6.1. VX0003

Sensitivity and precision
2 ranges of sensitivity 5 to 100 V/m
100 to 2,000 V/m
Range selection manual ("RANGE")
Measurement precision ± 10 % on LED thresholds
Frequency range
Analysis of electric distribution 10 Hz to 3 kHz
Analysis of equipment connected to mains 10 Hz to 3 kHz
Display and sound signal
Display on two 7 LED scales
Direct display in V/m
Sound signal proportional to the level of the electric field
"Low battery" and "HOLD" indicators
Commands
On / Off (with automatic switch-off)
Keeping the measurement on hold ("HOLD")
Sound signal On / Off
Antenna and reference
"field" antenna fitted within the appliance
"individual" field reference measurement (by manual contact at
the rear of the appliance)
"Earth" field reference measurement (earth connection cable)

6.2. VX0100

Sensitivity and precision
2 ranges of sensitivity 1 to 200 V/m
200 to 2000 V/m
Range selection automatic
Measurement precision ± 3 % ± 20 D from 40 to 800 Hz
for 10 to 100 % of the range
Frequency range
Analysis of electrical distribution
10 Hz to 3 kHz (3 kHz low-pass filter)
Analysis of equipment connected to mains power supply
3 kHz to 100 kHz (3 kHz high-pass filter)
10 Hz to 100 kHz (without 3 kHz filter)
Display and sound signal
2000 point back-light LCD display
Direct display in V/m
Sound signal proportional to the level of the electric field
Indication of the measurement frequency range
"Low battery" and "HOLD" indicators
Commands
On / Off (with automatic switch-off)
Keeping the measurement on hold ("HOLD")
Sound signal On / Off
3 kHz filter selection (<, >, full bandwidth)
Antenna and reference
Removable "field + cable detection" antenna Ø 62 mm
"individual" field reference measurement (by manual contact at
the rear of the appliance)
"Earth" field reference measurement (earth connection cable)
36
Chapter II
VX0003 / VX0100