Troubleshooting - Triton TSPS370 Instrucciones De Uso

Troubleshooting

Problem
No function when ON/OFF Switch (6) is operated
Sanding Sleeve slips on drum
Large amounts of wood dust and chippings are
on the table surface
Sanding drum not operating at full speed or motor
sounds different to normal
Guarantee
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated otherwise)
for information on future releases. Details provided will not be made available
to any third party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: TSPS370 Retain your receipt as proof of purchase
Possible cause
No power
Defective ON/OFF Switch
Spindle Lock Nut (2) not tight enough
Dust Port (21) passage is blocked
Incorrect Table Insert used
Motor over-heating
Motor faulty
Triton Precision Power Tools guarantees to the purchaser of this product that if any
part proves to be defective due to faulty materials or workmanship within 3 YEARS
from the date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal wear
and tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
art pr
This does not affect your statutory rights
Solution
Check power supply
Have the switch assembly replaced at an authorised
Triton service centre
Tighten Spindle Lock Nut in small increments until the
drum secures the Sanding Sleeve
Turn OFF the machine at the mains. Remove the Sanding
Drum (25), Table Insert (26) and the Spindle Washer.
Remove the blockage from the dust extractor passage
Change to the correct-sized Table Insert
Switch OFF and allow to cool for a 1/2hr and check the
Motor Vents (17 & 22) are not blocked
Contact an authorised Triton service centre
oves to be defecti
US
11