Tecnotest Easylight 432 M Manual Operativo página 39

ELECTRONIC HEADLIGHT CENTERING DEVICE ____________________________________ TO USE CORRECTLY
• The temperature of the place in which the Headlight Centering device is
used must not be less than 5 degrees Centigrade or more than
50 degrees Centigrade.
• The Headlight Centering device has two types of power supply:
Internal power supply with a 9 Volt battery (transistor battery).
A D.C. external power supply between a minimum 7 Volts and
maximum 24 Volts.
• To not rest any objects on the optic chamber.
Only use water based substances when cleaning the control panel, the
•
lens and the other parts of the instrument.
• Only place the sighting device (10) inside the optic chamber when the
monitoring and adjusting operations have terminated.
• Always cover the optic chamber when use of the Headlight Centering
device has terminated.
ATTENTION:
Never subject the optic chamber to impact. If this occurs, consult
an after-sales service center for functional checks as to whether
the symmetries of the instrument are still accurate.
Keep all the packing material. You will need this if you have to
move the unit without risk of damage.
OPERATING INSTRUCTIONS
ELECTRONIC HEADLIGHT CENTERING DEVICE ____________________________________ TO USE CORRECTLY
• The temperature of the place in which the Headlight Centering device is
used must not be less than 5 degrees Centigrade or more than
50 degrees Centigrade.
• The Headlight Centering device has two types of power supply:
Internal power supply with a 9 Volt battery (transistor battery).
A D.C. external power supply between a minimum 7 Volts and
maximum 24 Volts.
• To not rest any objects on the optic chamber.
Only use water based substances when cleaning the control panel, the
•
lens and the other parts of the instrument.
• Only place the sighting device (10) inside the optic chamber when the
monitoring and adjusting operations have terminated.
• Always cover the optic chamber when use of the Headlight Centering
device has terminated.
ATTENTION:
Never subject the optic chamber to impact. If this occurs, consult
an after-sales service center for functional checks as to whether
the symmetries of the instrument are still accurate.
Keep all the packing material. You will need this if you have to
move the unit without risk of damage.
35 OPERATING INSTRUCTIONS 35