Tecnotest Easylight 432 M Manual Operativo página 50

LUXMETER _____________________________________________ ELECTRONIC HEADLIGHT CENTERING DEVICE
3.0 - LUXMETER
After having adjusted the lower beams, driving beams or fog lamp, the
operator can check the light intensity of the beam by proceeding in the
following way: digit the LUX TEST key.
Example:
The message lux=000000 LUX=000 corresponding to 25 m is displayed
on the monitor and it keeps being displayed as long as the key itself is
pressed.
Once the key has been released, the indication will remain for 4 seconds
and will then return to the previous message.
• Having terminated the operation, keep the ESC/OFF key depressed for
2 seconds to switch off the headlight centering unit.
46 OPERATING INSTRUCTIONS
LUXMETER _____________________________________________ ELECTRONIC HEADLIGHT CENTERING DEVICE
3.0 - LUXMETER
After having adjusted the lower beams, driving beams or fog lamp, the
operator can check the light intensity of the beam by proceeding in the
following way: digit the LUX TEST key.
Example:
The message lux=000000 LUX=000 corresponding to 25 m is displayed
on the monitor and it keeps being displayed as long as the key itself is
pressed.
Once the key has been released, the indication will remain for 4 seconds
and will then return to the previous message.
• Having terminated the operation, keep the ESC/OFF key depressed for
2 seconds to switch off the headlight centering unit.
46 OPERATING INSTRUCTIONS