Cleaning And Maintenance; Cleaning The Appliance - Gaggenau VR 230 120 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning and maintenance

en
Cleaning and maintenance
m
Warning – Risk of burns!
C l e a n i n g a n d m a i n t e n a n c e
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
m
Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
Caution!
Risk of surface damage
Do not use these cleaners
harsh or abrasive cleaning agents
oven cleaners
corrosive or aggressive cleaners, or those
containing chlorine
cleaning agents with a high alcohol content
hard and scratchy sponges, brushes or scouring
pads
If such an agent comes into contact with the appliance,
wash it off immediately with water.
Thoroughly wash out new sponge cloths before using
them!

Cleaning the appliance

Clean the appliance after each use once it has cooled
down. This will prevent residues from being burnt on.
Residues that have been burnt-on several times can be
difficult to remove.
Do not scrape burnt-on residues. Instead, leave them to
soak in water and washing-up liquid.
Remove the wire rack and fold the heating elements
upwards. Remove the lava stone tray and the lava
stones.
12
Appliance part/
Recommended cleaning
surface
Wire rack and
Remove heavy soling with the cleaning
frame
brush. Soak the wire rack in the sink.
Clean using the cleaning brush and wash-
ing-up liquid and dry thoroughly.
For heavy soiling, use our grill cleaning gel
(article number 00311761).
You can also clean the wire rack and the
frame in the dishwasher. This may cause
the wire rack and the frame to become
lighter in colour. This does not affect their
usability.
Stainless steel
Apply washing-up liquid with a soft, damp
tray
cloth; dry with a soft cloth. Leave stubborn
dirt to soak.
For heavy soiling, use our stainless steel
cleaner (article no. 00311499) or grill
cleaning gel (article no. 00311761).
Lava stone tray
Remove the lava stones. Clean the lava
stone tray in a sink of water and washing-
up liquid using a scrubbing brush; dry with
a soft cloth. Leave stubborn dirt to soak or
remove it using our grill cleaning gel (arti-
cle no. 00311761).
Lava stones
Replace the lava stones when they have
turned black. This means that the lava
stones are saturated with fat, which may
generate a lot of smoke or ignite during
operation.
You can obtain compatible lava stones
from your specialist dealer (article no.
LV 030 000).
Control panel
The soapy cloth must not be too wet. Dry
with a soft cloth.
If acidic substances (e.g. vinegar, ketchup,
mustard, marinades) are spilled on the
control panel, remove them immediately.
Control knobs
The soapy cloth must not be too wet. Dry
with a soft cloth.
Caution!
Damage to the appliance
Do not detach the control knobs to clean
them.

Publicidad

Tabla de contenido
loading

Tabla de contenido