Trouble Shooting - Gaggenau VR 230 120 Instrucciones De Uso

Trouble shooting

m
Warning – Risk of electric shock!
T r o u b l e s h o o t i n g
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
If the appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact the after-
sales service.
Disruption
The appliance is not working
The appliance will not heat up and the
illuminated ring is lit white
The appliance will not heat up and the
illuminated ring is lit orange
The appliance switches itself off while in
use; the illuminated ring is flashing
orange and white alternately
--------
Faults often have simple explanations. Please read the
information in the table before calling the after-sales
service.
Possible cause
The plug is not plugged into the
mains
The fuse/circuit breaker is faulty Check in the fuse box to make sure that the fuse/
Power failure
Demo mode is activated
Overheating protection
Safety switch-off function:
The controls on the appliance
have not been used for a long
time
The appliance remains off after a
power failure
Solution
Connect the appliance to the electricity supply
circuit breaker for the appliance is in working order
Check whether other kitchen appliances are work-
ing
Deactivate demo mode:
1 Turn all the control knobs to 0. Unplug the appli-
ance from the mains for 30 seconds (switch off
the household fuse or the circuit breaker in the
fuse box).
2 Plug the appliance back in. Turn any of the con-
trol knobs one position anti-clockwise within
3 minutes. All the illuminated rings will light up
white.
3 The control knob three positions clockwise.
4 Turn the control knob back to 0. Two audible sig-
nals will confirm that demo mode has been
deactivated.
The appliance itself switches off the grill heating
element in order to protect the appliance and the fit-
ted unit. Once the appliance is cool enough, it will
switch the grill heating element on again. It can take
up to 45 minutes to cool down.
Turn the control knob to 0, then switch it back on (if
you wish to continue using the appliance)
Turn the control knob to 0, then switch it back on (if
you wish to continue using the appliance)
Trouble shooting
en
13