Operating The Appliance; Switching On; Switching Off; Residual Heat Indicator - Gaggenau VR 230 120 Instrucciones De Uso

Operating the appliance

S witching on
O p e r a t i n g t h e a p p l i a n c e
The frame is cooler than the wire rack during operation.
Only use the surface of the wire rack for grilling.
The two grill elements can be controlled separately. This
means that you can grill foods that require different
temperatures at the same time. If required, you can
connect the two grill elements together and set the
same grill setting at the same time for both of them.
Press the control knob and turn it to the required grill
setting. The illuminated ring lights up white. If you do
not want to cook over the entire grill zone, switch on the
front or rear grill element only.
The illuminated ring dims from white to orange while the
appliance is heating up. An audible signal sounds once
the set temperature is reached. The preheating phase at
grill setting 9 takes approximately 10 minutes.
Connecting the grill elements
Push in any control knob and turn it to the
Push in the other control knob and turn it to the
required grill setting. Both grill elements are now at this
grill setting.

Switching off

Turn the control knob to 0. The operating light goes off.
m
Warning – Risk of burns!
The appliance will remain hot for a long time even after
you switch it off. Do not touch the appliance while the
residual heat indicator is flashing.
m
Warning – Risk of burns!
Do not close the appliance cover until the appliance has
cooled down completely. Do not operate the appliance
with the cover closed. Do not use the appliance cover
for placing objects or for keeping things warm.

Residual heat indicator

After switching off the appliance, the illuminated ring on
the control knob slowly flashes orange until the
appliance has cooled enough for it to be safe to touch.
Do not touch the appliance while the residual heat
indicator is flashing.

Overheating protection

To protect the appliance and the furniture, the grill
switches the heating elements off automatically when
overheated. After having cooled down, the appliance
switches on again.

Safety switch-off function

For your safety, the appliance has a safety switch-off
function. Any kind of heating will be switched off after
4 hours if the appliance controls are not used during
this time. The heating element will remain off after a
power failure. The illuminated ring on the control knob
is flashing orange and white alternately.
Turn the control knob to 0. You will now be able to start
the appliance again as usual.
ª
symbol.
Operating the appliance
en
9