Installing The Car Seat; Installation In The Vehicle - Foppapedretti UNIKO i-Size Manual De Instrucciones

surfaces (such as tables, etc).
• Make sure that the end of the belt does not get caught in moving parts (such
as automatic doors, escalators, etc.).
• CAUTION! The plastic parts of the car seat can heat up in the sun, causing
burns to the child. Protect the car seat from excessive heat, for example, by
using a lightweight cover.
• Take regular breaks when travelling on long journeys. Your child can get tired
very easily. Avoid leaving the child in the car seat for too long.

INSTALLATION IN THE VEHICLE

1. Preparing the base
Place the car seat base on the passenger seat of the
car. Press the release button on the ISOFIX connector,
located at the centre of the base.
2. Installing the base
Make sure that your vehicle is fitted with ISOFIX anchoring
points and that it is one of those approved in the list of
compatible vehicles provided.
Locate the ISOFIX points; for any problem consult the user
manual of the vehicle. These are usually placed between
the passenger seat cushion and backrest.
1) Insert the two plastic guides for the ISOFIX connectors,
if necessary, and attach them to the ISOFIX points in the
vehicle. The plastic guides help to identify the ISOFIX
points in the vehicle, making installation easier. They also protect the vehicle
passenger seats.
• ENGLISH •

INSTALLING THE CAR SEAT

31
D
ISOFIX
fastening points
Insert guides