Rivacold FS Serie Manual De Uso Y Mantenimiento página 35

UK
1 . G e n e r a l I n
1 . G e n e r a l I n
1.1.General Information
This Use and Maintenance Handbook is an integral part of the B
manufactured by R
IVACOLD SRL
This handbook must be carefully stored and protected from any agents which could cause its deterioration, for the entire lifecycle of
the machine.
This handbook was drafted for the purpose of providing operators and technicians responsible for the maintenance of the machine
with the essential information and instructions to correctly operate the machine in safe conditions.
ATTENTION:
This handbook contains all the data and information necessary for preliminary training of staff responsible for managing the
correctly; for this purpose, its use is compulsory.
DANGER:
Even though all the attention notes and warnings for correct use of the
staff responsible for maintenance to intervene correctly, this handbook assumes that, in the environments in which the
installed, all norms in force are complied with in relation to safety and hygiene in the workplace matters and that staff responsible for
operation and maintenance have a level of training that allows them to correctly interpret the information reported.
NOTE:
1.2. Property of information
This Use and Maintenance Handbook contains confidential information.
All rights reserved.
This handbook cannot be reproduced or photocopied, all or in part, without the prior, written consent of the manufacturer. Use of this
documentation material is only permitted to the client to whom the handbook was provided with the machine and only for purposes of
installation, use and maintenance of the machine to which the handbook refers.
The manufacturer declares that the information contained in this handbook complies with the technical and safety specifications of the
machine to which the handbook refers. The drawings, diagrams and technical data reported are updated on the date of publication of
this document and are exclusively valid for the machine to which they are attached.
The manufacturer reserves the right to make changes or improvements without prior notice to this documentation material.
The manufacturer does not assume any responsibility for direct or indirect damage to persons, property or domestic animals as a
result of use of this documentation material or the machine in conditions other than those planned.
1.3. Contents of the Use and Maintenance Handbook
This Maintenance Handbook is for use by operators and technicians to allow them to understand and correctly use the
This handbook, in fact, other than a functional description of the
indications to:
transport and install the
correctly use the
MACHINE
conduct correct cleaning, regulation and maintenance of the
pay attention to the fundamental safety and accident prevention regulations.
The aforementioned staff will therefore have the chance to understand the potential of the
during its management.
It is necessary to carefully read all the chapters to understand the instructions provided in this handbook and to operate the
for subsequent, easy searches of the contents, refer to Table 1, containing a description of the topics covered in the chapters.
Table 1 – Layout of Use and Maintenance Handbook
CHAPTER
Description of this use and maintenance handbook, of its layout and
the conventions used;
Chapter 1
definition of the terms used;
General Information
definition of the relationship between the manufactures and the
purchaser/user (in terms of the warranty and support conditions).
Chapter 2
Description of the
Machine description
Presentation of general indications for the
Chapter 3 implemented to protect operator staff, on generic warnings to
Safety and Technical comply with to correctly, use the machine and the residual risks
Data present during the phases of the life cycle of the MACHINE;
presentation of the main technical data concerning the
f o r m a t i o n
f o r m a t i o n
; for this reason, it must accompany the
Please keep this manual in a safe and accessible place for use as an immediate reference by any operator or
engineer.
for clarity, some illustrations in this handbook show the machine or its components when opened or dismantled; it
is however forbidden to use the machine in such conditions.
the user can request a copy of this document (for example, in case of damage to the original document) by
making a written request to the Manufacturer's Technical Office (see Paragraph 1.6.1 – Request for Support in
this chapter), making a commitment, in any case, to replace the damaged copy.
correctly;
MACHINE
;
CONTENTS
and its functioning.
MACHINE
FS (identified, in this document, with the term
LOCKSYSTEM
if transferred to a new user or owner.
MACHINE
by the operators have been highlighted or to enable
MACHINE
and its main parts, also contains the instructions and
MACHINE
;
MACHINE
MACHINE
, on the solutions
MACHINE
All staff using the
mechanic and electric maintenance workers and
.
MACHINE
MACHINE
and the problems that may arise
RECIPIENTS
All staff using the
MACHINE
All staff using the
MACHINE
(in particular, the
MACHINE
the personnel appointed to its handling).
FS Pag. 35 Rev 00 02/11
)
MACHINE
MACHINE
is
MACHINE
.
;
MACHINE
.
.