Rivacold FS Serie Manual De Uso Y Mantenimiento página 36

CHAPTER
Chapter 4
Transportation and
Installation
Chapter 5
Machine use
Chapter 6
Maintenance and
Demolition
Chapter 7 Optional
Chapter 8 faults
search
Chapter 9
Attachments
1.4. Convention and Definitions
1.4.1. General Information
The Use and Maintenance Handbook of the
installation, use, regulation, maintenance and decommissioning), easy availability of relative necessary information for the user of the
.
MACHINE
All the documentation relating to the
(2006/42/EC), PED Directive (97/23/CE) and the safety norms in force; therefore, the complete reading of all the relative material is
indispensible to obtain the best performance from the
The configuration of certain units or devices described or shown in the documents can differ from that in the
preparation according to particular requirements or safety norms; in this case, certain descriptions, references or procedures
recommended can be generic in order to maintain their efficiency. Drawings mentioned or photographs are provided for example
purposes as a reference for easy comprehension of the text.
1.4.2. Term conventions
: the term used in this Use and Maintenance Handbook to indicate the B
MACHINE
: the acronym indicates Individual Protection Device/s.
IPD
1.4.3. Definitions
DANGER ZONE
Any inside or near the
ZONE
person.
USER
Any (business person/company) adequately using the
PERSON
people.
EXPOSED PERSON
Any located inside or partly in the danger zone or near these zones.
PERSON
OPERATOR
Staff, generally without specific skills, that conduct the operations necessary to operate the
place in which it is installed; if necessary, the operator can conduct simple regulation and restore of functioning operations on the
.
MACHINE
MECHANICAL MAINTENANCE PERSON
Q who can intervene on any mechanical unit to regulate or repair it and conduct the necessary maintenance
UALIFIED TECHNICIAN
operations.
The mechanical maintenance person is not enabled to conduct intervention on the electrical systems when voltage is present.
ELECTRICAL MAINTENANCE PERSON
Q responsible for all electrical intervention (regulation, maintenance and repairs) and, when necessary, works with
UALIFIED TECHNICIAN
voltage present inside the electrical cabinets and the shunt boxes.
MOVEMENT STAFF
Q that perform the tasks of moving the
UALIFIED STAFF
MANUFACTURER TECHNICIAN
Q made available by the manufacturer of the
UALIFIED TECHNICIAN
however, when agreed with the user.
CONTENTS
Description of the lifting and transportation modes of the
description of the modes of connection to the power supply and of
the appliances;
description of the storage modes of the
Description of the procedures to follow in order to use the
Description of the verification and control procedures of the parts
and the components of the
subject to wear out);
description of the procedures that allow the appointed personnel to
perform the cleaning of the
MACHINE
presentation of the indications to perform the dismantling,
demolition, and disposal of the
Description of the possible optional features that can be installed on
the MACHINE.
List of the possible malfunctions of the machine and the relative
solutions.
Indications for the retrieval of the:
technical sheet of the
MACHINE
refrigerant diagram,
electrical wiring diagram of the
documentation of the components present on the
MACHINE
was drafted by developing the topics indicated by the Machinery Directive
MACHINE
in which the presence of an exposed person composes a risk to the safety and health of that
MACHINE
MACHINE
MACHINE
.
MACHINE
(in particular, the parts most
MACHINE
;
.
MACHINE
,
,
MACHINE
MACHINE
was divided into chapters to enable, for each phase of the
and ensure maximum duration of all its units.
MACHINE
or that assigns its use or operations connected to use to trained
MACHINE
or the materials used if the operation requires the use of lifting devices.
to conduct complex operations in particular situations or,
MACHINE
RECIPIENTS
; All staff using the machine (in particular the
mechanic and electric maintenance workers, the
technicians of the Producer, and the personnel
appointed to handling.)
. All staff using the
MACHINE
All staff using the machine (in particular the
mechanic and electric maintenance workers, the
technicians of the Producer, and the personnel
appointed to handling.)
All staff using the
All staff using the
All staff using the
.
FS.
LOCKSYSTEM SERIES
and clean the
MACHINE
UK
.
MACHINE
.
MACHINE
.
MACHINE
.
MACHINE
life (transport,
MACHINE
in the specific
MACHINE
and the
MACHINE
FS Pag. 36 Rev 00 02/12