BABYTREND PC11 Instrucciones De Montaje página 3

ASSEMBLY
Check that you have all the parts for this model before assembling the Portable Chair.
* May or May not Include Padding. Padding may vary.
Portable chair
ASSEMBLING THE PORTABLE
CHAIR
1) • Unlock the arms of the chair and
pull the arms apart while lifting the
seat back (Fig. 1a).
• When the seat back and arms are
up, push the seat back down into
the seat until it is fully locked into
place (Fig. 1b).
• (If Equipped) Pull the padding over
the back of the portable chair
(Fig. 1c).
• Pull the elastic strap and secure it
to the seat back hook (Fig. 1d).
HEIGHT ADJUSTMENT
High Position Low Position
2) • For the low position, keep the
feet in the locked position.
5
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Tray *Padding
Fig. 1a
Fig. 1b Fig. 1c
Fig. 1d
• For the High position, turn seat over and
unlock each foot, swing each foot into an
upright position (Fig. 2a), then, push each
foot down into the bottom of the seat until it is
fully locked into place (Fig. 2b).
ATTACHING BOOSTER TO A CHAIR
WARNING:
Always
secure the product on a chair
using the bottom and back
attachment straps. Never use
this product on a stool or
bench that does not have a seat
back.
WARNING:
Always
check security of fit to adult
chair before each use and any
limitations of the product.
To use the bottom straps:
3) • Place the portable chair onto a chair that has
a seat back with no armrest.
NOTE: Do Not use seat cushion between
booster to a chair.
• Wrap bottom straps around the bottom of
the chair. Buckle the straps making sure you
hear buckle *CLICK* closed (Fig. 3a).
• Pull the Free ends of the strap to firmly
tighten the portable chair to the chair
(Fig. 3c).
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
6