SATA SATAjet 1000 B Instrucciones De Servicio página 496

SATAjet 1000 B (RP/HVLP) Operating Instructions
US
Malfunction
Round/flat fan control
not working – control
can be turned.
Round/flat fan control
cannot be turned.
Paint spray gun does
not shut off air.
Material bubbles up in
gravity flow cup.
Corrosion on air noz-
zle threading, material
passage (cup connec-
tion) or paint spray
gun body.
496
Cause
Air distribution ring
positioned incorrectly
(pin not in bore hole)
or damaged.
Round/flat fan control
turned too sharply
counterclockwise;
spindle in gun thread-
ing loose.
Air piston seat dirty.
Air piston is worn.
Atomized air entering
gravity flow cup via
paint passage. Paint
nozzle not tightened
enough. Air nozzle not
screwed on complete-
ly, air circuit clogged,
faulty seating or dam-
aged nozzle insert.
Cleaning fluid (aque-
ous) remains too long
on gun.
Unsuitable cleaning
fluids used.
Corrective action
Replace air distribution
ring (see 8.2).
Remove round/flat fan
control with universal
wrench and make oper-
ational or replace com-
pletely (see 8.6).
Clean air piston seat.
Read and follow clean-
ing instructions (see 9).
Replace air piston
and air piston packing
(see 8.4).
Secure, clean or re-
place parts.
Have gun body re-
placed. Read and follow
cleaning instructions
(see 9).