dirna Bergstrom bycool blue line FLAT Instrucciones De Montaje página 40

FLAT
EN
Only for Globetrotter XL cabins (L2H3)
9
Position the front on the front studs with (1) M6
wide-flanged washer and (1) M6 nut on each
stud. Tighten the nuts until the channelling
equipment comes into contact with the upper
foam in the equipment.
Important: The channelling equipment should
come to a stop against the foam rubber in
order to prevent leakages of air.
9
EPDM
seal
Cabin ceiling
Cover
10
Tighten the nut (A) in the diagram until it comes
into contact with the upper part of the front.
10
EPDM
seal
Cabin ceiling
Cover
Bycool Base
Height A
M6 Nut
Bycool Bas
M6 Nut (A)
M6 Nut
Channelling equipment
10
EPDM seal
40
EPDM seal
Front with windows
®
9