dirna Bergstrom bycool blue line FLAT Instrucciones De Montaje página 46

FLAT
EN
Valid for Standard and Globetrotter XL cabins
4
Position M6 rivet nuts and secure the support
with 6/100x30 screws.
(*) - When not supported on the smooth section,
use a 10mm separator and 6/100 x 40 screws.
5
Secure the pump to the tank using (2) 5.4x19
mm threaded tapping screws.
M6 rivet nut
Tuerca remache M6
46
6/100x30 allen
6/100x30 allen
ø
Arandela grower Ø6 6 grower washer
ø
Arandela plana Ø6
6 flat washer
(4) Supports
(4)Soportes
Tank
Depósito
6/100x30
ø
Arandela grower Ø6
6 grower washer
ø
8 flat washer
Arandela plana Ø8
Supports
Soporte
Rear cabin section
Parte trasera cabina
(*)
6/100x40
(*)
10 mm separator
Separador 10mm.
(*)
Rear cabin section
Parte trasera cabina
®