Abicor Binzel ABIPLAS WELD 250 MT Manual De Instrucciones página 26

3 Product description
Tungsten electrode E3, standard
Ø
Length of the cable assembly, standard
Tab. 2 Product-specific torch data (EN 60974-7)
Plasma gas
(argon, argon/helium, helium)
Shielding gas
(inert gas or inert/active gas mixtures)
Tab. 3 Process gases according to DIN EN ISO 14175
Type of voltage
Polarity of the tungsten electrode
Polarity of the workpiece
Operating voltage
Welding current at 100 % duty cycle
Tab. 4 Main arc
Type of voltage
Polarity of the tungsten electrode
Polarity of the plasma nozzle
Arc current
Tab. 5 Pilot/main arc
Max. supply temperature
Min. flow rate
Inlet pressure
Coolant conductance
Recommended coolant
Tab. 6 Torch cooling information
EN - 6
ABIPLAS
L = 75 mm
Ø 3.2/4.0/4.8/5.0 mm
Up to 8.0 m. Further lengths on request.
0.7–5.0 l/min
4.0–20.0 l/min
DC direct voltage
Cathodic (–)
Anodic (+)
10–40 V
80–250 A
DC direct voltage
Cathodic (–)
Anodic (+)
4–15 A
20 °C (active recooling system required)
2.0 l/min
Min. 3 bar, max. 4 bar
Max. 30 µS/cm
ABICOR BINZEL coolants from the
BTC range
BAL.0311 • 2018-02-05
®
WELD 250 MT