Tightening The Torch Body; Connecting The Cable Assembly To The Device - Abicor Binzel ABIPLAS WELD 250 MT Manual De Instrucciones

6 Putting into operation

6.2 Tightening the torch body

Fig. 5 Tightening area

6.3 Connecting the cable assembly to the device

1
1 Pilot current connection
2 Main current connection
Fig. 6 Connecting the cable assembly
EN - 12
CAUTION
Mechanical hazard
A loose torch body can result in a mechanical hazard.
• Check that the torch body and cable assembly are firmly attached.
2 3
3 Coolant return
4 Coolant supply
1 Join the welding cable plug and socket at the power source and lock them.
2 Connect the plasma and shielding gases correctly.
3 Connect the pilot power plug to the power source.
ABIPLAS
115
4 5 6
5 Plasma gas
6 Shielding gas
BAL.0311 • 2018-02-05
®
WELD 250 MT