Designated Use; Personal Protective Equipment (Ppe) - Abicor Binzel ABIPLAS WELD 250 MT Manual De Instrucciones

®
ABIPLAS WELD 250 MT
1 Identification
1.1 Marking
2 Safety

2.1 Designated use

2.2 Personal protective equipment (PPE)

BAL.0311 • 2018-02-05
®
The ABIPLAS WELD 250 MT welding torch system is used in industry and
the trade sector for inert gas welding using inert gases and gas mixtures
containing active gases. This range can be used for joint welding in all welding
positions. The ABIPLAS
in a liquid-cooled version. It requires a power source and an active recooling
system for operation. These operating instructions only describe the
®
ABIPLAS WELD 250 MT welding torch system, which must only be
operated using original ABICOR BINZEL spare parts.
This product fulfills the requirements that apply to the market to which it has
been introduced. A corresponding marking has been affixed to the product,
if required.
The attached safety instructions must be observed.
• The device described in these instructions may be used only for the
purpose and in the manner described in these instructions. In doing so,
observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are
not permitted.
To avoid danger to the user, these instructions recommend the use of personal
protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory
mask, protective gloves and safety shoes.
®
WELD 250 MT welding torch system is available
1 Identification
EN - 3