baltur GI 500 DSPGN ME Manual De Instrucciones página 25

GI 500 / 700 DSPGN ME TECHNICAL FEATURES
1) Combustion head
2) Seal
3) Burner connection flange
4) Buttefly gas valve
5) Gas regulation servomotor
6) MPA22 Display
7) Screw for adjusting air supply to
combustion head
8) Air pressure switch
9) Air regulation servomotor
10) Electrical panel
11) Hinge
12) Fan motor
13) Ignition transformer
mod. A
GI 500 DSPGN ME 1025
GI 700 DSPGN ME 1065
CONSTRUCTION CHARACTESTICS
The burner consists of:
• Light aluminium alloy fan part.
• High performance centrifugal fan.
• Air intake with butterfly gate for the regulation of the air combusting
flow rate.
• Adjustable blast-pipe with stainless steel nozzle and deflector
disk in steel.
• Flame viewer.
• Three-phase electric motor to run fan.
• Air pressure switch to ensure the presence of combustion air.
A1 A2 B1 B5
400 625 580 330 1800
400 665 580 330 1800
5 / 14
0006081225_200912
C D E F
Ø
500 366 325 580
500 390 325 580
• Gas train complete with control, operating and safety valve, valve
tightness control, minimum pressure switch, pressure regulator
and gas filter.
• Burner automatic command and control equipment with micropro-
cessor (electronic cam) in compliance with European standard
EN298, with valve tightness control and eBus connection. Display
for operating sequence and error code in the event of a lockout.
• Flame detection by ionisation electrode.
• Control panel with stop/go switch and burner off, block indicators,
keyboard for electronic cam pianification.
• 4 poles outlet for the connection of the capacity electronic regu-
lator.
• Electrical protection rating IP40.
I L M N
520 M20 380 990
520 M20 400 990
E
N
G
L
I
S
H
R