Working Fields - baltur GI 500 DSPGN ME Manual De Instrucciones

TECHNICAL FEATURES
THERMIC POWER
POWER SUPPLY VOLTAGE
FAN MOTOR
IGNITION TRANSFORMER
APPARATUS
FLAME DETECTION
GAS REGULATION SERVOMOTOR
E
AIR REGULATION SERVOMOTOR
N
MATERIAL SUPPLIED
G
INSULATING SEAL
L
STUD BOLTS
HEXAGON NUTS
I
FLAT WASHERS
S
H

WORKING FIELDS

i
The working fields are obtained on test boilers compliant with EN676 standards and are approximate for burner-boiler coupling.
To ensure correct burner operation, the dimensions of the combustion chamber must comply with current regulations; if this is not
the case, consult the manufacturers.
GI 500 DSPGN ME
MAX kW 5000
MIN kW
700
Volts
kW 15 - 50 Hz
r.p.m. 2920
SAD 1.2 WG
SAD 3.0 WG
GI 500 DSPGN ME
4 / 14
0006081225_200912
MOD.
GI 700 DSPGN ME GI 850 DSPGN ME
7000
1000
3 N ~ 400 V - 50 Hz
18.5 - 50 Hz
2920
8 kV - 30 mA
MPA 22
IONIZATION PROBE
24 V - 7.5 W - 1.2 Nm - IP54
24 V - 10 W - 3 Nm - IP54
GI 700 DSPGN ME GI 850 DSPGN ME
2
N° 6 M20
N° 6 M20
N° 6 Ø20
8500
1200
22 - 50 Hz
2920