Use Contrary To The Intended Purpose - Winkhaus panicLock 1125 Instrucciones De Montaje Y Mantenimiento

Installation, Operating and Maintenance
Instructions panicLock 1125
The proper functions of the access control systems and of the accessory equipment
included in the scope of delivery of the Winkhaus company have been tested.
If you use components made by other companies and if you have any doubts about the
suitability of these components, you will have to contact the respective manufacturer
about their fitness for use.
To ensure the intended use:
• the information and instructions required for this purpose must be passed on to
the respective persons,
• only trained professionals should install the door furniture, locking units and acces-
sory parts according to the installation instructions. DIN standards which may also
apply are to be followed, too.
The conditions of use as intended have been met, once the Winkhaus fittings are:
• installed according to their defined function and the installation specifications,
• not used in a different way than described,
• maintained at regular intervals as instructed,
• not used any longer if signs of wear are detected,
• repaired by trained professionals in the event of malfunctions.
The supplier/manufacturer does not accept any liability for personal injury or material
damage caused by incorrect handling or improper use.
1.3

Use contrary to the intended purpose

The locking systems are not designed to absorb or compensate for changes in shape
or changes in the closing mechanism of the door caused by changes in temperature or
in the structure of the building.
Doors which are used in damp rooms and in environments with aggressive corrosion-
promoting air compositions require special door furniture.
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen
Subject to technical changes
3 Print-no. 504 474 3
09/2016
Important
Information
Product
Description
Installation
Maintenance
and Care
Appendix
www.winkhaus.de
EN
1
2
3
4
5