Maintenance And Care - Winkhaus panicLock 1125 Instrucciones De Montaje Y Mantenimiento

Installation, Operating and Maintenance
Instructions panicLock 1125
4

Maintenance and Care

• Maintenance tests, function checks and checks for the smooth running of the door
lock should be performed by the operator or an authorized person at least once a
month.
• Maintenance, care and cleaning of the cylinder are to be accomplished according
to the guidance of the cylinder manufacturer.
• Components of the door furniture relevant to security have to be checked for tight-
ness and wear at regular intervals. If required, the retaining screws should be re-
tightened and defective parts should be replaced.
• You should only use neutral cleaning agents or care products that do not contain
any abrasives to protect the anticorrosion coat of the door furniture.
• Check! The panic locking system must be lubricated once a year, or up all 20,000
operating cycles at least, if necessary more often.
• It must be checked regularly to see if the operating element is properly fixed. The
force necessary to open the escape door lock must be measured with a force me-
ter. The measured values have to be compared with the values measured after the
first installation to see if there are major changes.
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen
Subject to technical changes
11 Print-no. 504 474 3
09/2016
Important
Information
Product
Description
Installation
Maintenance
and Care
Appendix
www.winkhaus.de
EN
1
2
3
4
5