Panasonic PV-GS19 Instrucciones De Operación página 57

Confirmation before connection
(for Windows XP/2000)
When you connect the personal computer and
the Camcorder with the USB Cable and then use
MotionDV STUDIO on Windows XP (SP1 or later) or
Windows 2000 (SP4 or later), check the driver of the
USB host controller.
• It is required to use the driver for which [Microsoft] is
displayed on [Driver Provider] in [Driver] tab.
1
Select [Start] >> [Settings] >> [Control
Panel] to start [System].
• [System Properties] is displayed.
2
Click [Hardware] tab and then click [Device
Manager] then [Universal Serial Bus
Controller].
3
Right-click [Enhanced Host Controller] and
then select [Properties].
• The indication [Enhanced Host Controller] is
changed as [EHCI] depending on the host
controller you use.
4
Click [Driver] tab to check the description
on [Driver Provider].
• If [Microsoft] is displayed on [Driver Provider],
the confirmation procedure is completed.
If a description other than [Microsoft] is
displayed
• Update the driver with the following procedure.
1
Click [Update Driver...].
With a PC
2
Check [Install from a list or specifi c
location (Advanced)] and then click [Next].
• When your OS is Windows 2000, click [Next]
after [Update Device Driver Wizard] appears.
3
For Windows XP Users:
Check [Don't search. I will choose the
driver to install] and then click [Next].
For Windows 2000 Users:
Check [Display a list of the known drivers
for this device so that I can choose a
specifi c driver] and then click [Next].
4
Click [Standard Universal PCI to USB Host
Controller] and then click [Next].
5
Click [Finish].
• The update of the driver is completed. Connect
the Camcorder.
57