Pc Connection With Dv Interface Cable - Panasonic PV-GS19 Instrucciones De Operación

Recorder:
4
Set [ ADVANCE] >> [
[YES], then move the Joystick Control [▲]
to select [ ].
Or, while pressing the [● REC] Button
press the [PLAY] Button
Control.
• Recording starts.
To Cancel the Standby for Recording
When the Camcorder is standby for recording,
move the Joystick Control [▼] and select the [
To Stop Dubbing
Press the [ ] Button
move the Joystick Control [▲] to select [
CAUTION:
Unauthorized exchanging and/or copying
of copyrighted recordings may be copyright
infringement.
• For other notes concerning this item, see page 67.
PC Connection With DV Interface
Cable
A video clip can be transferred directly to your PC
(Personal Computer) via a DV Interface Cable
(Optional) using products and software from a number
of video editing software companies.
Using products from video editing software companies
allows you to capture and edit video clips using the DV
Interface.
Our DVC being OHCI compliant should
have no problem working with any OHCI
compliant Firewire Card/video - Editing
software package.
46
Editing Mode
REC STDBY] >>
S P 3 h 5 9 m 5 9 s 2 9 f
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 5
,
45
on the Remote
55
].
or the [ ■ ] Button , or
52 53
] again.
• Personal Computer must be equipped with an DV
Terminal.
• During Camcorder playback, do not disconnect the
DV Interface Cable or turn the Camcorder off as this
may cause a PC hang-up error.
• 1394 (i.LINK) Interface must conform to OHCI (Open
Host Controller Interface Specification).