Panasonic PV-GS19 Instrucciones De Operación página 73

Different sounds are reproduced at the same
time.
• Have you set [ SETUP] >> [
[MIX]? If you set [ AUDIO REC] >> [12bit] and
dub audio to a recorded tape, you can hear the
sound on recording and the sound dubbed at a
later time. To hear the sounds separately, set to
[ST1] or [ST2]. (p. 44)
• Have you set [ SETUP] >> [
[STEREO] and reproduced a picture containing
the main sound and sub sound? Set to [L] to hear
main sound, and set to [R] to hear the sub sound.
(pp. 66~67)
Audio dubbing cannot be performed (PV-GS35
Only).
• Is the accidental erasure prevention slider on the
cassette open? If it is open (set to [SAVE]), audio
dubbing cannot be performed. (p. 18)
• Are you attempting to edit a tape portion that was
recorded in LP mode? LP mode does not allow
audio dubbing. (p. 25)
The original sound was erased when audio
dubbing was performed (PV-GS35 Only).
• If you perform audio dubbing on a recording made
in [16bit] mode, the original sound will be erased. If
you wish to preserve the original sound, be sure to
select [12bit] mode when recording.
Sounds cannot be played back.
• Although a cassette with no audio dubbing is being
played, have you set [ SETUP] >> [
AUDIO] >> [ST2]? To play back a cassette with
no audio dubbing, set [ 12bit AUDIO] >> [ST1].
(PV-GS35 Only) (p. 44)
• Is the variable speed search function activated?
Press the [VAR. SEARCH] button on the Remote
Control to cancel the variable speed search
function. (PV-GS35 Only) (p. 38)
Playback (Pictures)
Mosaic-pattern noise appears on images
during cue or review playback.
• This phenomenon is characteristic of digital video
systems. It is not a malfunction.
Horizontal stripes appear on images during
cue and review playback.
• Horizontal stripes may appear depending on the
scene, but this is not a malfunction.
Although the Camcorder is correctly
connected to a TV, playback images cannot
be seen.
• Have you selected video input on the TV? Please
read the operating instructions of your TV and
select the channel that matches the input terminals
used for the connection.
Others
Playback picture is not clear.
• Are the heads of the Camcorder dirty? If the heads
are dirty, playback image cannot be clear. Clean
12bit AUDIO] >>
the heads by using the head cleaner for digital
video. (p. 69)
• If the terminal for the AV cable is soiled, noises
may appear on the screen. Wipe the soil off the
terminal with a soft cloth, and then connect the
cable to the AV terminal.
AUDIO OUT] >>
• Is a picture containing a copyright protection
signal (copy guard) being recorded? When a
protected picture is played back by the Camcorder,
mosaic-like patterns appear on the picture.
Recorded pictures are not clear.
• Have you set [ BASIC] >> [
>> [
[
a mosaic-like pattern. Set [
[
A file recorded on a card cannot be deleted.
• Is the file locked? Locked files cannot be deleted.
(p. 41)
• For the SD Memory Card, if its write protect switch
is set to [LOCK], then deletion is disabled. (p. 67)
Photoshot playback images do not look
normal.
• The picture may be damaged. In order to prevent
the loss of image data, backing up on a cassette or
12bit
a personal computer is recommended.
Even if a card is formatted, it cannot be used.
• Either the Camcorder or the card may be damaged.
Please consult a dealer.
During playback, [UNPLAYABLE CARD] is
displayed.
• The image was either recorded in a different
format, or data is damaged.
The indication disappears, the screen is
frozen, or no operation can be performed.
• Turn off the power to the Camcorder. If the power
cannot be turned off, press the [RESET] button
(p. 74), or detach the battery or AC adaptor and
then reattach it. After that, turn on the power again.
If normal operation is still not restored, detach the
power connected, and consult the dealer who you
purchased the Camcorder from.
Card
PICT. QUALITY]
(Normal)]? If recording is done with it set to
(Normal)], pictures with fine details may include
PICT. QUALITY] >>
(High)]. (p. 28)
Others
73