For Macintosh - Panasonic PV-GS19 Instrucciones De Operación

RAM:
32 MB or more (64 MB or more recommended)
Free hard disk space:
At least 30 MB or more
Interface:
USB 1.1 or more
• For Windows Me/2000/XP users, the USB
equipment operates with the driver installed as
standard in OS.

For Macintosh

OS:
Mac OS X v 10.1 – X v 10.3
CPU:
iMac, iBook or Power Book G4, Power Mac G4 or
Power Mac G5
RAM:
64 MB or more
• The USB equipment operates with the driver
installed as standard in OS.
Installing the USB Driver (For Windows
98SE Only) For Using the Built-in SD
Driver Feature
PV-GS35 Only
Please install USB Driver first before connecting the
Camcorder to your personal computer with the USB
Cable only if you have Windows 98SE OS.
• If your computer has Windows Me/2000/XP, the
USB Driver is not required to be installed.
1
Turn on the personal computer and start up
Windows.
2
Insert the CD-ROM into the personal
computer's CD-ROM drive.
• Quit all applications.
• The [Setup Menu] Screen appears.
[PV-GS35: Supplied]
3
Click the [USB Driver].
• The set up program starts running.
4
Click [Restart] if the [InstallShield] dialog
appears.
• Do not remove the CD-ROM.
48
With a PC
5
Finish installation by following the
on-screen instructions.
• Click [Next] and proceed with installation.
• After completing the installation, Click [Finish].
6
After the USB Driver is installed, please
restart your computer.
• Reboot the computer to finish installing USB
driver.
• Installation continues after the computer reboots
if you selected additional software.
• A message indicating a conflict between versions
may be displayed during the installation. This will not
cause a problem. Simply click [Yes] to proceed with
the installation.
For PV-GS19/PV-GS31
• If you have direct dial-up connection capability to the
Internet, please download the USB Driver.
• Please install USB Driver first before connecting the
Camcorder to your personal computer with the USB
Cable (not supplied) only if you have Windows 98SE
OS.
• If your computer has Windows Me/2000/XP, the
USB Driver is not required to be installed.
1
In order to download and install the USB
Driver, go to
http://www.panasonic.com/consumerdownloads
2
Click [Camcorder] on the screen.
3
Click [USB Driver version 1.00].
4
Decompress the downloaded data.
5
Double click
• The set up program starts running.
6
Click [Restart] if the [InstallShield] dialog
appears.
7
Finish installation by following the
on-screen instructions.
• Click [Next] and proceed with installation.
• After completing the installation, Click [Finish].
8
After the USB Driver is installed, please
restart your computer.
icon.