Using The Reset Button; Explanation Of Terms - Panasonic PV-GS19 Instrucciones De Operación

[PUSH THE RESET SWITCH] is displayed.
• An irregularity in the Camcorder has been
automatically detected. Remove the cassette or
the card for data protection and then press the
[RESET] Button with the protection on the Lens
Cap. The Camcorder will be activated.
• An irregularity in the Camcorder has been
automatically detected. Remove the cassette or
the card for data protection and then press the
[RESET] Button. The Camcorder will be activated.
• If you do not press the [RESET] Button, the power
to the Camcorder is turned off automatically about
1 minute later.
• Even after you press the [RESET] button, the
indication may still appear repeatedly. If so,
the Camcorder needs repair. Detach the power
connected, and consult the dealer who you
purchased the Camcorder from. Do not attempt to
repair the appliance by yourself.
Even if connected by the USB cable, the
Camcorder is not recognized by the PC.
• Is the USB driver installed? For information, refer to
pages 47~48.
When the USB cable is disconnected, an error
message will appear on PC.
• To disconnect the USB cable safely, double-click
the [ ] icon in the task tray and follow the
instructions on the screen.
The Camcorder malfunctions on editing,
dubbing from digital video equipment, or
using "MotionDV STUDIO 5.3E LE for DV".
• If a tape is recorded in multiple modes such as SP
and LP (recording mode), 12bit and 16bit (sound
recording mode), recorded and unrecorded parts,
the Camcorder may malfunction at a point where
the mode switches. When you edit, do not record in
multiple modes.
The Warning/Alarm indication [
when the Camcorder is operated in the Web
Camera mode.
• Did you press the [MENU] Button or the Recording
Start/Stop Button? You cannot use the menu or
record onto the Tape/Card in the Web Camera
mode.
• Is the setting for the Remote Control correct?
• Did you attempt to play a tape without inserting it?
Insert a tape.
• Did you attempt to play a tape with copyright
protection (copy guard)? Pictures of the tape
with copyright protection (copy guard) cannot be
displayed on the PC. (The audio of the tape can be
played.)
• Is the Video Stream Driver installed? (pp. 51~52)
74
Others

Using the RESET button

1
Undo Grip Belt end
Cord
2
Use projection
the [RESET] Button

Explanation of Terms

Digital Video System
In a digital video system, images and sounds are
converted into digital signals and recorded on a
tape. This complete digital recording is capable of
recording and playback with minimal image and sound
deterioration.
In addition, it automatically records data, such as Time
Code and Date/Time, as digital signals.
Compatibility with S-VHS or VHS Cassettes
Because this Camcorder employs a digital system for
recording image and sound data, it is not compatible
] appears
with conventional S-VHS or VHS video equipment that
employs an analog recording system.
The size and shape of the Cassettes are also
different.
Compatibility with Output Signals
Because AV signal output from the AV signal output
Jack is analog (the same as conventional video
systems), this Camcorder can be connected with
S-VHS or VHS video or a TV for playback.
and pull Lens Cap
1
downward to loosen Grip Belt.
2
1
2
on the Lens Cap to press
3
4 .
4
3