Setting Date And Time; Internal Lithium Battery Recharge - Panasonic PV-GS19 Instrucciones De Operación

[ DISPLAY]
Display Mode (p. 62)
[ REMOTE] (PV-GS35 Only)
Remote Control Mode (p. 15)
[ BEEP SOUND]
Beep Sound (p. 64)
[ LCD SET]
LCD Adjustment (p. 21)
[ EVF SET]
Viewfinder Adjustment (p. 21)
[ POWER SAVE]
Power Save Mode (p. 62)
[ LANGUAGE]
Language Setup Sub-menu (p. 22)
[PICTURE PLAYBACK MENU]
e.g.,
BASIC
ADVANCE
SETUP
LANGUAGE
SETUP ENTER
[ BASIC]
Basic Setup Sub-Menu
[ DATE/TIME]
Date and Time Indication (p. 62)
[ PROTECT]
Setting the Lock (p. 41)
[ ADVANCE]
Advance Setup Sub-Menu
[ DPOF SET]
Setting DPOF (p. 41)
[ CARD FORMAT]
Formatting a Card (p. 42)
[ SETUP]
Setup Sub-Menu
[ DISPLAY]
Display Mode (p. 62)
[ REMOTE] (PV-GS35 Only)
Remote Control Mode (p. 15)
[ LCD SET]
LCD Adjustment (p. 21)
[ EVF SET]
Viewfinder Adjustment (p. 21)
[ POWER SAVE]
Power Save Mode (p. 62)
[ LANGUAGE]
Language Setup Sub-menu (p. 22)

Setting Date and Time

Since the internal clock of the Camcorder has a
slight imprecision make sure to check the time before
recording.
30
34
35
24
Before Using
BASIC
DATE/TIME D/T
PROTECT NO
EXIT SETUP ENTER EXIT
• Set to Tape/Card Recording Mode.
1
Set [ BASIC] >> [ CLOCK SET] >> [YES].
CLOCK SET
JAN /01/2005 12AM:00
SETUP
SET ENTER
2
Move the Joystick Control [◄] or [►]
to select the item to be set. Then move the
Joystick Control [▲] or [▼]
desired value.
• Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the Joystick Control
setting the date and time.
• The clock operation starts from [00] second.
• If the built-in battery is weak, the [
flashes. In this case, charge the built-in battery.
• The clock uses the 12-hour system.
About date/time
• The Date and Time function are driven by a
built-in lithium battery.
• Make sure to check the time before recording
because the built-in clock is not very accurate.

Internal Lithium Battery Recharge

The internal lithium battery sustains the operation
of the clock. If the [ ] or [--] is indicated when the
Camcorder is turned on, the internal lithium battery is
near exhaustion.
1
Connect the AC Adaptor to the Camcorder
with the power turned off and then connect
to the AC jack.
EXIT
35
to set the
35
to fi nish
35
] Indication