Using Open Broadcaster; Transmitting Video With Atem Streaming Bridge - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

With your Skype settings set correctly, perhaps try out a Skype call with a friend as a quick test
to check your broadcast setup is working.
That's all you need to do and ATEM Mini is now ready to broadcast your video to the world live!

Using Open Broadcaster

Open Broadcaster is another streaming platform that takes your program video and streams
it live via your favourite video sharing application, like YouTube or Vimeo.
For information on how to set up Open Broadcaster with your ATEM Mini, refer to the
'Setting up Open Broadcaster' section in this manual.

Transmitting Video with ATEM Streaming Bridge

The ATEM Streaming Bridge allows you to decode the streaming video from any ATEM Mini Pro
and convert it back to SDI or HDMI video. It allows you to send video over your local network,
or to anywhere in the world via the internet.
You can connect ATEM Streaming Bridge in 3 different ways. One is to connect it direct to your
ATEM Mini Pro using a simple Ethernet cable, or you can connect it via your local network, or
you can use it anywhere in the world using the internet.
ATEM Streaming Bridge could be used by broadcasters to allow remote ATEM Mini Pro studios
to connect into broadcast infrastructure. Or it can be used to connect to large projectors or
digital signage in large public venues.
Getting Started
To get started with ATEM Streaming Bridge, then you only need to connect the Ethernet and
plug in a monitor. Simply connect the Ethernet cable to the ATEM Mini Pro and the other end of
the same cable to the ATEM Streaming Bridge. Next, connect a video monitor to the SDI or
HDMI video output of the ATEM Streaming Bridge. Now press the on air button and you should
see video appear on the monitor.
This "direct connection" way is the simplest way to use the ATEM Streaming Bridge. You can
also connect it via your local network, however you will then need to select the ATEM Streaming
Bridge in the streaming palette in the ATEM Software Control. A list of all streaming bridges on
your network will appear in the platform menu.
For more information on how to use ATEM Streaming Bridge, then check the ATEM Streaming
Bridge section later in this manual.
Getting Started 10