Connecting Atem Mini Pro To An Internet Router - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Connecting ATEM Mini Pro
to an Internet Router
On ATEM Mini Pro, connecting to an internet router via Ethernet lets you stream your broadcast
over Ethernet while using the USB-C connector to record to an external drive.
To set up direct streaming via Ethernet, first enter the stream details in ATEM Software Control.
This will store the streaming information in ATEM Mini Pro.
1 In ATEM Software Control's processing palettes go to the 'output' settings and select
your streaming platform from the drop down menu.
2 Enter the server closest to your location in the 'server' drop down menu, then enter
your stream key in the 'key' setting. Refer to 'getting a stream key' in the next section
for more information.
3 With the details entered into ATEM Software Control, now plug your ATEM Mini Pro
into the internet router using a CAT 5 network cable. This is usually a wireless router
that connects all your home or office devices to the internet. The unit will normally
have additional Ethernet inputs and you can plug your ATEM Mini Pro directly into
one of those.
TIP If your computer is connected to the internet router and has an Ethernet
port, you can also connect ATEM Mini Pro to your computer via Ethernet and
connect to the internet via your computer.
4 It's worth streaming a test to make sure everything is set correctly. You can do this by
switching color bars, or a standby graphic in the media player to the program output
and checking you can see it on your streaming platform.
Now if you are happy and ready to start, all you need to do is press 'on air' and you are
broadcasting live!
NOTE Most internet routers support DHCP, but if yours does not, you can
still connect by setting the network settings manually using Blackmagic
ATEM Setup.

Connecting ATEM Mini Pro to an Internet Router

96