Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento página 53

Bell
This filter is used to increase
or decrease a range of
frequencies surrounding
a defined frequency.
Notch
This filter lets you remove,
or cut, a defined frequency.
TIP It's not uncommon to have filters on each band overlapping on the graph curve
with adjustments working together. For example, you may have a low shelf filter
applied to band 4, and a notch filter on band 5 reducing a frequency within the
same range.
Dynamics Controls
In addition to the 6 band parametric equalizer, you can also enhance and finesse the input
and master output audio using dynamics controls. Where the equalizer lets you control the
frequencies within a signal, dynamics controls let you set how various levels behave. Levels
within the signal can be adjusted including expanding the dynamic range between low levels
and high levels, gating an input so you can choose what is stronger or softer within a signal,
or you can even use the compressor and limiter so that audio can be generally lifted and made
stronger without clipping.
Combined with equalizer controls, these features are extremely powerful, giving you the ability
to precisely shape and define the audio and generally optimize the sound of the master output.
This section describes the expander, gate, compressor and limiter controls.
The dynamics controls can be
opened for each input and the
master output by clicking on its
corresponding dynamics indicator
High Shelf
Lets you increase or decrease
the level of volume for higher
frequencies along the graph.
High Pass
Smoothly removes extreme
low end frequencies, allowing
the high end frequencies to
pass unaffected.
Low Shelf
Lets you increase or decrease
the level of volume for lower
frequencies along the graph.
Low Pass
Smoothly removes extreme
high end frequencies, allowing
the low end frequencies to
pass unaffected.
ATEM Software Control 53