Additional Features on ATEM Mini Pro
ATEM Mini Pro has additional features that give you more options for your broadcast and even
more ability to control your production directly from the unit without the need for a computer.
Dedicated buttons on the control panel let you switch sources to the HDMI output, start/stop
streaming and start/stop recording.
With ATEM Mini Pro, you also have the choice of streaming via the webcam output or direct
streaming via Ethernet. At any time, you can record your broadcast to an external disk via
USB-C and use the dedicated record buttons on ATEM Mini Pro to start and stop recording.
One of the most exciting new features on ATEM Mini Pro is the multiview. This powerful feature
displays a multiview on the HDMI video output that shows a comprehensive overview of your
production. All 4 HDMI input sources, the program and preview outputs, plus important
recording, streaming and audio status information is presented on one screen so you always
know exactly what is happening during your broadcast!
This section describes all the additional features on ATEM Mini Pro and how to use them.
Stream Buttons
Streaming is built into the ATEM Mini Pro model, so you don't need to use any complicated
software to get started. Just use the included ATEM Software Control to select what streaming
service you intend to use and then enter in the streaming key. Once you have completed this
setup, you can simply press On Air to go live! There is more information in the live streaming
section of this manual.
The stream buttons labelled 'on air' and 'off' let you start
and stop streaming directly from your ATEM Mini Pro
When your broadcast has finished, all you need to do is press the 'off' stream button and your
stream is stopped. This means once you are set up and streaming, your ATEM Mini Pro is
completely independent and you don't need to go back to your computer to stop and close
your stream.
Additional Features on ATEM Mini Pro
16