Starting And Stopping The Cooking Cycle - Angelo Po 0N1FR1ID Manual De Uso

To start and stop the appliance, proceed as
follows.
Starting
Switch on the appliance (see page 11).
1)
Press key (B) and then key (E) to activate the
2)
oil "melting" procedure.
When the preheating temperature is reached
the beeper sounds.
Press key (E) to deactivate the "melting" func-
3)
tion.
The temperature is maintained at 90°C until
cooking starts.
Press key (C) to activate the temperature
4)
input mode.
Press keys (F-G) to set the cooking tempera-
5)
ture.
The data set on the control panel are retained
in the memory until the electricity supply is
turned off .
Press key (E) to terminate the temperature
6)
maintenance function.
GB
3269870_ut_GB_rev.2

STARTING AND STOPPING THE COOKING CYCLE

B
P
C
Press button (B) to start the cooking cycle.
7)
Lights (P-Q) fl ash while the oil is heating to
the temperature of use, and then remain
constantly on.
To display the temperature set during cook-
8)
ing, press key (C).
Stopping
Press key (B) to stop the cooking cycle.
1)
Importante Important
If the electricity supply is cut off for less than
20-40 seconds, the cooking cycle restarts au-
tomatically.
If the blackout lasts more than 40 seconds,
press key (B) to restart the cooking cycle.
A Q
F G
- 12 -
E
ENGLISH