The illustration shows the position of the signs
provided.
Nameplate with manufacturer and
A)
appliance data.
General hazard:read the manual carefully
B)
before carrying out any procedure.
General hazard: when washing the appli-
C)
ance do not point pressurised water jets at
internal parts.
General hazard: all relevant regulations
D)
must be complied with. "Install in compli-
ance with the relevant regulations and use in
well ventilated premises only".
General hazard: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
General hazard: watch out for hot surfaces.
F)
CE marking: this indicates that the
G)
equipment is compliant with all relevant laws
applicable to the product.
GB
The appliance can be equipped with the
following accessories on request (see "general
catalogue").
3269850_ut_GB_rev.1
SAFETY AND INFORMATION SIGNS
OPTIONAL ACCESSORIES
- 6 -
E
D
C
B
G
A
F
37M3202
ENGLISH