Connect The Interface To The Machine Controller And Power Source - Fronius AI IO/i Manual De Instrucciones

Connect the inter-
face to the ma-
chine controller
and power source
NOTE! To enable the interface to be connected to the power source, the power
source must feature an optional SpeedNet connection on the rear.
(1) (2) (3)
Connect the terminal (1) for the interfa-
1
ce to the machine controller - in accor-
dance with the pin assignment
description and the information printed
on the interface cable.
Connect the SpeedNet (2) connector
2
from the interface to the SpeedNet (3)
connector on the power source.
25