General; Preliminary Inspection; Applications; Working Limits - Lowara SSV 30 Serie Instrucciones De Instalacion Y Uso

en

1. General

The SSV series pumps are vertical multistage pumps.
The model identification code, shown on the order form and on the rating plate, is self-explanatory and
refers to the main characteristics of the pumps and materials, as follows:
SV 60 05 F
Always specify the model identification code, together with the serial number, when asking our sales or
servicing departments for technical information or spare parts.
The following instructions apply to the standard version; for the variations and characteristics of special
versions, refer to the sale contract documentation.
For instructions or conditions not contained in this manual or in the sale documentation, please contact
our service center nearest you.

2. Preliminary inspection

When the pump is delivered, check that it has not been damaged during shipping. Promptly inform our
nearest dealer, if necessary.

3. Applications

The SSV pumps are suitable for water handling systems in the civil, industrial and agricultural sectors, for
pressure boosting, water supply, irrigation and washing systems, boiler filling and water treatment plants.

4. Working limits

PUMP
DANGER
WARNING
DANGER
MOTOR
WARNING
18
150 4 T
T = three-phase
4 = 4 poles version
15= motor power in kW x 10
F = in-line round-flanged ports
N = AISI 316 version, in-line, round flanges
05= no. of stages
60= rated flow rate in m
Series
Max. working pressure:
- 16 bars for versions up to SV 3006 and the entire SV 60 series
- 25 bars for versions from SV 3007 to SV 3012
Liquid temperature: from – 25°C to 120° C
Pump not suitable for:
- liquids containing abrasives
- liquids with solid and fibrous substances
- flammable and explosive liquids
Max. number of starts per hour:
(a final 6, if present, indicates the 60 Hz version)
/h
3
three-phase motors 4 to 7,5 kW 20
three-phase motors 11 - 15 kW
three-phase motors 18.5 - 22 kW 12
English
15