Repairs; Environmental Protection; Technical Specifications - Metabo PSE 1200 Instrucciones De Manejo

17026834_0806 PSE 1200 NAFTA.book Seite 9 Dienstag, 1. August 2006 1:42 13

9 Repairs

Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.

10 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.

11 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
P = Nominal power input
1
P = Power output
2
I = Current
n = Stroke rate at idle speed
0
s = Stroke length
m = Weight without mains cable
During operation the noise level can exceed
85 dB(A).
Wear ear muffs!
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
9